EchoIRLP software has now been added to several of the NARRI IRLP Nodes. This means NARRI IRLP nodes with EchoIRLP software can
call and received calls from either IRLP or EchoLink, but not both at the same time
or when connected somewhere.
Echoirlp allows the following combinations:
- EchoIRLP to IRLP node-to-node or node-to-reflector connections
- EchoIRLP node to EchoLink node, other EchoIRLP, or EchoLink Conference Server.
At the time an EchoIRLP node is being used for EchoLink it is no longer available for IRLP. The same is true
when Nodes are being used in the IRLP mode; an EchoLink node cannot connect when IRLP is in use. EchoIRLP does not allow any form
of cross linking between EchoLink and the IRLP system. For example: EchoLink stations can not connect to the IRLP Western
Reflector, but can connect to Echo Conference Servers that are digitally linked to the Western Reflector (See Dual VoIP Bridges
Node Connection Status:
When using an IRLP node in the EchoIRLP mode on the EchoLink System it will show up with the assigned EchoLink node number. When
a connection is made to EchoLink the node will show up on the IRLP Status Page (see http://status.irlp.net) as connected to the
"E_L_Project" . When operating on IRLP node-to-node or node-to-reflector the node will show up as an IRLP node on the
IRLP Status Page as before. When IRLP Node 3641 is connected to IRLP, say 9250, it shows up on the EchoLink system as
"connected to IRLP 9250". This is subject to change
If connected to one of the integrated NARRI conferences with
an Echo link Windows Client (using Echo link software on a PC) the users will
see IRLP nodes as stn1234, or REF9250 (example only) and Echo link will
show up in the usual Echo link format, i.e., *WORLD* (conference),
W7ABC (user PC), W7ABC-L (link) or W7ABC-R (repeater).
Current logins to the Echo link system of /users, Links,
Repeaters and Conferences may viewed at
. Shows Echo link only.